[ANY-CUT II]How do I set up the Black Mark Sensor?

To set up the Black Mark Sensor on the any-CUTII machine, follow these steps:

1. Position the Sensor:
   • Move the sensor so that it is directly above the path of the black marks on the media.
2. Secure the Sensor:
   • Once positioned correctly, ensure the sensor is securely fastened in place.
3. Auto-Teach Function:
   • Use the auto-teach function to calibrate the sensor:
     • Press the button on the top of the sensor three times. The sensor will blink to indicate it is in teaching mode.
     • Move the media so that the sensor can detect the black mark.
     • The sensor should automatically adjust and learn the position of the black mark.
4. Verification:
   • Move the sensor to a black area on the media where there is no black mark and press the button once. The light should go off in the black area and turn on when sensing the black mark.

→ Refer to "[ANY-CUT II] User Manual_ver1.0_ENG.pdf", Page 61 for more details.